440C Stainless Steel (AISI 440C / UNS S44004 / 1.4125 / SUS440C) Supplier

Available Forms

As a 440C stainless steel manufacturer in China, Kongfang Metal provide a wide range of 440C materials.

Cold Rolled Stainless Steel Sheet

440C Sheet

Cold Rolled
Width: 1000 - 2000mm
Thickness: 0.3 - 6.0mm

Hot Rolled Stainless Steel Plate

440C Plate

Hot Rolled
Width: 1000 - 2000mm
Thickness: 3 - 100mm

Cold-Rolled Stainless Steel Coil

440C Cold-Rolled Coil

Cold Rolled
Width: 1000 - 2000mm
Thickness: 0.3 - 6.0mm

Hot-Rolled Stainless Steel Coil

440C Hot-Rolled Coil

Hot Rolled
Width: 1000 - 2000mm
Thickness: 3 - 14mm

Stainless Steel Strip

440C Strip

Width: 7 - 600mm
Thickness: 0.3 - 10mm

Stainless Steel Seamless Pipe

440C Seamless Pipe

OD: ≤610mm
WT: 1 - 100 mm

Stainless Steel Welded Pipe

440C Welded Pipe

OD: 6 - 3000mm
WT: 1 - 100 mm

Stainless Steel Round Bar

440C Round Bar

Diameter: 1 - 200mm
Length: 100 - 12000mm

Stainless Steel Flat Bar

440C Flat Bar

Width: 20 - 800 mm
Thickness: 3 - 60 mm

Stainless Steel Angle Bar

440C Angle Bar

Side Length: 20 - 250 mm
Thickness: 3 - 35 mm

Stainless Steel Channel

440C Channel

Height: 50 - 400 mm
Thickness: 4 - 20 mm

Stainless Steel H Beam

440C H Beam

Height: 100 - 1000 mm
Thickness: 6 - 40 mm

If you need the highest hardness, best edge retention, and strongest wear resistance in the 440 stainless family, 440C is the top-tier choice.

It reaches HRC 58–62 after heat treatment—making it one of the hardest stainless steels available for knives, bearings, cutting tools, surgical components, and precision mechanical parts.

Compared with 440A and 440B:

  • 440C gives you the highest carbon content → maximum hardness

  • Excellent cutting performance and wear resistance

  • Lower corrosion resistance than 440A/440B, but still suitable for many demanding environments

If your application requires extreme edge performance, 440C is the premium option.

Standards & Equivalent Grades

ASTM UNS EN DIN JIS GB
440C
S44004
1.4125
X105CrMo17
SUS440C
9Cr18Mo

Chemical Composition

Grade Standard C Cr Mn Si P S Mo Fe
440C
ASTM A276
0.95–1.20
16.0–18.0
≤1.0
≤1.0
≤0.04
≤0.03
0.40–0.75
Balance
1.4125
EN 10088-1
1.00–1.20
16.0–18.0
≤1.0
≤1.0
≤0.04
≤0.03
0.40–0.80
Balance
9Cr18Mo
GB/T 1220
0.95–1.20
16.0–18.0
≤1.0
≤1.0
≤0.035
≤0.03
0.60–0.80
Balance
What the Chemistry Means for You
  • High carbon → HRC 58–62, extreme cutting performance

  • High chromium → moderate corrosion resistance, bright polish

  • Molybdenum (Mo) → added pitting resistance

  • Low sulfur → improved cleanliness

440C is engineered for maximum edge strength and durability.

Mechanical Properties of 440C

Condition Tensile Strength Yield Strength Elongation Hardness
Annealed
~760–830 MPa
~450 MPa
10–12 %
≤ 223 HBW
Hardened & Tempered
—
—
—
HRC 58–62
Performance Summary
  • Hardest stainless steel in the 440 family

  • Outstanding wear and abrasion resistance

  • Ideal for cutting tools and precision components

Key Features

440C is designed for high-performance cutting and precision engineering.

  • Highest hardness among common stainless grades (HRC 58–62)

  • Exceptional wear resistance and edge retention

  • Strong dimensional stability after heat treatment

  • Good corrosion resistance for a high-carbon steel

  • Magnetic in all conditions

  • Excellent for precision-ground components and tool steels

Corrosion & Heat Resistance

Corrosion Resistance

440C performs well in:

  • Fresh water

  • Low chloride environments

  • Mild acids

  • Food-processing settings

  • Steam and humid conditions

Note: Corrosion resistance is lower than 440A and 440B due to very high carbon content.

Heat Resistance
  • Resists oxidation up to 760 °C (1400 °F)

  • Best continuous performance below 300 °C (572 °F)

  • Heat treatment significantly boosts hardness and durability

440C Stainless Steel – Corrosion and Heat Resistance

Processing & Fabrication

Stainless Steel Machinability
Machining

440C is challenging to machine due to its high carbon content.

Tips for best machining:

  • Machine in annealed condition

  • Use rigid setups and carbide tools

  • Reduce cutting speeds

  • Apply generous coolant

Stainless Steel Weldability
Welding

Welding is not recommended, high carbon causes cracking and brittleness.

If absolutely necessary:

  • Preheat 200–300 °C

  • Use 309L or 410NiMo filler

  • Post-weld temper

Stainless Steel Heat Treatment
Heat Treatment

440C responds extremely well to proper hardening and tempering.

  • Annealing: 840–900 °C

  • Hardening: 1010–1070 °C, air or oil quench

  • Tempering: 150–370 °C

Lower tempering → maximum hardness
Higher tempering → improved toughness

Stainless Steel Surface Finishing
Surface Finishing

440C supports:

  • Mirror polish

  • Satin finishes

  • Razor-sharp cutting edges

  • Passivation for improved corrosion resistance

440A vs 440B vs 440C — Quick Comparison

Property 440A 440B 440C
Carbon
Low
Medium
High
Hardness
HRC 54–58
HRC 56–60
HRC 58–62
Corrosion Resistance
Best
Medium
Lower
Wear Resistance
Good
Better
Best
Toughness
Best
Medium
Lower
Sharpness Retention
Good
Better
Best
Sharpening Ease
Easy
Medium
Hardest
Summary for Buyers
  • Choose 440A → corrosion resistance

  • Choose 440B → balanced performance

  • Choose 440C → maximum edge strength

440C Stainless Steel Industrial Applications – Knives, Bearings & Tool Holders

Industrial Applications

440C is ideal for applications requiring maximum hardness, such as:

  • Premium kitchen knives

  • Hunting & survival knives

  • Surgical and dental tools

  • Scissors and shears

  • Ball bearings and bearing races

  • High-wear machine components

  • Precision gauge tools

  • Mechanical seals and valves

  • High-end cutting blades

Workability & Formability

  • Forge at 1150–1180 °C

  • Finish forging around 950–1000 °C

  • Low cold formability

  • Excellent grindability and edge sharpening

Purchasing Tips

Before ordering 440C stainless steel, confirm:

  • Grade identity: 440C / S44004 / 1.4125 / SUS440C / 9Cr18Mo

  • Required hardness (HRC target)

  • Dimensional tolerances

  • Delivery condition (annealed or hardened)

  • Surface finish (bright, mirror, satin)

  • Certification requirements (EN 10204 3.1)

FAQs

What hardness can 440C reach?

Up to HRC 58–62, depending on heat treatment.

Is 440C stainless steel magnetic?

Yes. It is magnetic in all conditions.

Is 440C good for kitchen knives?

Yes—premium knives use 440C for its excellent edge retention.

How does 440C compare to 440A and 440B?

440C is harder and more wear-resistant but has slightly lower corrosion resistance.

What is 440C used for?

High-end knives, surgical tools, bearings, cutting instruments, and precision components.

Looking for 440C stainless steel?

Kongfang Metal delivers stable quality, fast global shipping, and full certification.

✅ 10,000+ customers served across domestic and international markets
✅ Export transactions in 30+ countries across six continents
✅ ISO-certified management systems within the Kongfang group
✅ CE documentation for applicable products and orders
✅ Independent third-party inspection available on request
✅ 20,000 metric tons of saleable inventory
✅ Professional export packaging and fast delivery
✅ Free samples, mill test certificates, and cut-to-size services available

Kongfang Metal Factory
en_USEN
Send Your Inquiry Today

Scan to add on WeChat

Kongfang Metal WeChat-QR-Code