mm to Inches Calculator
mm ↔ inch Converter
Convert between millimeters (mm) and inches (in). Type in either field—the other updates instantly using the exact definition 1 in = 25.4 mm.
© Kongfang Metal — Tools
mm to Inches Formula, Fractions and Conversion Chart
Use these exact relationships for any material: inches = millimeters ÷ 25.4 and millimeters = inches × 25.4. One inch is exactly 25.4 mm; the metal grade does not change the unit conversion.
| Millimeters | Decimal inches | Nearest 1/64 in |
|---|---|---|
| 10 mm | 0.3937 in | 25/64 in |
| 20 mm | 0.7874 in | 25/32 in |
| 25 mm | 0.9843 in | 63/64 in |
| 30 mm | 1.1811 in | 1 3/16 in |
| 50 mm | 1.9685 in | 1 31/32 in |
Fraction values are approximations. The chart lists four-decimal reference values; the calculator displays three decimal places. Retain the original dimension and tolerance, and use a conversion with sufficient precision if three decimals are too coarse for the task. For quotations, record the original dimension and the converted value so buyers and mills can check the same specification.
FAQ
Inches = Millimeters ÷ 25.4. The reverse is Millimeters = Inches × 25.4.
The conversion uses the exact definition 1 in = 25.4 mm. This calculator displays three decimal places. Keep the original drawing value and tolerance; if rounding to three decimals is too coarse for the task, use a conversion with sufficient precision.
Yes. Enter a value in mm to get in, or enter in to get mm—the other field updates automatically.
The calculator displays decimal values. The chart above lists approximate fractions rounded to the nearest 1/64 in. Use those fractions as a workshop reference, and retain the original dimension and tolerance when checking fits.
Sheet/plate thickness, tube/pipe OD and wall, and cut lengths. Converting mm↔inch avoids confusion when quoting ASTM/ASME sizes to metric buyers.
No. Unit conversion doesn’t change tolerances, but rounding does. This calculator displays three decimals. Keep the original dimension and tolerance, and use sufficient conversion precision for the drawing requirement.
Yes. Use the Copy button to place the formatted result in your clipboard for RFQs, emails, or spreadsheets.
North America and some legacy specs remain imperial. Global supply chains therefore require quick, reliable mm↔inch conversions.
Unit definitions follow NIST/ISO guidance; product dimensions often reference ASTM material standards (e.g., A240 plate, A312 pipe).
Approximate values: 10→0.394″, 20→0.787″, 25→0.984″, 30→1.181″, 50→1.969″. These are the calculator’s rounded three-decimal values. Retain the original dimension and tolerance.
Notes
Convert millimeters to inches—and back—instantly with Kongfang Metal’s mm to Inches Calculator. The tool accepts values in either unit and updates the other side in real time using the exact international definition 1 inch = 25.4 mm. It’s ideal for drawings, quotations, inspection reports, and cross-border sourcing where metric and imperial units appear side by side.
Engineers and buyers in stainless steel, carbon steel, and aluminum frequently need quick length conversions for sheet, plate, tube, and coil specifications. The calculator displays decimal results to three places; the separate chart provides approximate inch fractions for workshop reference, helping you align component sizes, tolerances, and cutting plans without manual lookups. Pair the conversion with our weight and gauge tools to complete your sizing workflow—fast, accurate, and consistent with global standards.
Use the calculator for the dimension conversion, then keep the drawing unit and required tolerance with the result.
Looking for high-quality stainless steel products? Explore our featured selections:














